Those of you who follow my facebook page will have already seen this, so I apologise if it's old news! I'm very excited that my first proper paper cut template is now available to download from my Etsy shop. The design is based on a paper cut I did a while ago.
It's been a bit of a learning curve as I normally hand draw all of my templates, which is fine for when I'm cutting them myself, but to expect someone else to follow my wonky lines and rubbings out is a bit too much to ask! So I've spent
a bit of time a lot of time getting to know a free program called Inkscape which you can download here if you've got the next three days to spend getting to grips with it! Seriously though, it's very good because you can make vector images which is great because they can be scaled up and down with no loss of quality.
Anyway, enough about the design process, this is the paper cut which you can make from the template which can be downloaded from my shop.
For those of you who would like to give it a go, I thought I'd include a few tips in this blog post.
- When cutting, start from the middle and work outwards; that way you're not weakening the paper around the edge before you've cut the middle. Cutting around the edge of the whole design should be the last thing you do. You can also leave it with a solid border if you like, depending on how you plan to frame it.
- Use the same rule for cutting each individual element, for example, cut the windows out of the bus before cutting the outline.
- When cutting the circles I find it easiest to cut half, then turn the paper to cut the other half. I'm better at cutting curves around to the right (if that makes sense) so just find out what works best for you.
- For fiddly bits like the countries of the world, use the tip of your finger to hold the paper firm, but be careful not to slip and chop it off!
I hope that helps, I've love to see how you get on if you give it a go!
- Finally, just take it slowly, make sure your blade is nice and sharp and don't press too firmly. Your movements should be steady but not stiff, else you'll end up with straight lines where you want curves!
Just a short post today as I will be back tomorrow to take part in the Blogland Tour which is a great way to discover new blogs.
I'll leave you with these few photos taken on our bike ride along the Tarka Trail today.
I'm sharing this post on the following blogs: Handmade Harbour, Manon Popje's Illustrations, Nifty Thrifty Things, Be Different Act Normal and Tatertots and Jello.
Labels: paper cutting, paper cutting template, Tarka Trail